22
( )
Book 54722160 (8/02)
NOISE EMISSION CONTROL
MAINTENANCE LOG
COMPRESSOR MODEL
SERIAL NO.
USER UNIT NO.
UNIT IDENTIFICATION
Engine Make & Model:
Serial No.:
Purchaser or Owner:
Address:
DEALER OR DISTRIBUTOR FROM
WHOM PURCHASED:
Date Purchased:
The Noise Control Act of 1972 (86 Stat. 1234) prohibits tampering with the noise control system of any compressor
manufactured and sold under the above regulations, specifically the following acts or the causing thereof:
(1) the removal or rendering inoperative by any persons, other than for purposes of maintenance, repair, or replace-
ment, of any device or element of design incorporated into new compressor for the purpose of noise control prior
to its sale or delivery to the ultimate purchaser or while it is in use; or (2) the use of the compressor after such device
or element of design has been removed or rendered inoperative by any person.
NOISE EMISSION WARRANTY
The manufacturer warrants to the ultimate purchaser and each subsequent purchaser that this air compressor was
designed, built and equipped to conform at the time of sale to the first retail purchaser, with all applicable U.S. EPA
Noise Control Regulations.
This warranty is not limited to any particular part, component, or system of the air compressor. Defects in the de-
sign, assembly or in any part, component, or system of the compressor which, at the time of sale to the first retail
purchaser, caused noise emissions to exceed Federal Standards are covered by this warranty for the life of the
air compressor.
INTRODUCTION
The unit for which this Maintenance Log is provided conforms to U.S. E.P.A. Regulations for Noise Emissions, ap-
plicable to Portable Air Compressors.
The purpose of this book is to provide (1) the Maintenance Performance Schedule for all required noise emission
controls and (2) space so that the purchaser or owner can record what maintenance was done, by whom, where
and when. The Maintenance Schedule and detailed instructions on the maintenance items are given on following
page.
