Ingersoll-Rand BXR-60, Инструкция по установке / эксплуатации / техническому обслуживанию / запасным частям

Страница: 4 / 67

SECTION 1 -
SAFETY PRECAUTIONS AND GUIDELINES
1-2
The electrical equipment of machines is to be inspected and checked at regular intervals. Defects such as loose connections
or scorched cables must be rectified immediately. •
VERIFY that all the instruction and safety labels are in place and readable. These are as important as any other equipment
on the compactor.
NEVER fill the fuel tank, with the engine running, while near an open flame, or when smoking. ALWAYS wipe up any spilled
fuel
immediately .
CHECK for WARNING tags placed on the machine. DO NOT operate the equipment until repairs have been made and the
WARNING tags are removed by authorized personnel.
KNOW the location of the Emergency Shut-Down Control if the machine is so equipped.
OPERATING
In the event of safety-relevant modifications or changes in the behaviour of the machine during operation, stop the machine
immediately and report the malfunction to the competent authority/person. •
Always wear the prescribed ear protectors. •
Always make sure that no person or obstruction is in your line of travel. Watch your step to avoid tripping.
USE extreme caution and be observant when working in close quarters or congested areas.
Before beginning work, familiarize yourself with the surroundings and circumstances of the site, such as obstacles in the working
and travelling area, the soil bearing capacity and any barriers separating the construction site from public roads. •
When travelling on public roads, ways and places always observe the valid traffic regulations and, if necessary, make sure
beforehand that the machine is in a condition compatible with these regulations •
Always keep at a distance from the edges of building pits and slopes. •
DO NOT run the engine in a closed building for an extended length of time. EXHAUST FUMES CAN KILL.
DO NOT operate the compactor on non-compactable material, such as concrete or hardened asphalt.
MAINTENANCE
Observe the adjusting, maintenance and inspection activities and intervals set out in the operating instructions, including
information on the replacement of parts and equipment. These activities may be executed by skilled personnel only. •
Ensure that the maintenance area is adequately secured. •
Observe the adjusting, maintenance and inspection activities and intervals set out in the operating instructions, including
information on the replacement of parts and equipment. These activities may be executed by skilled personnel only. •
After cleaning, examine all fuel, lubricant, and hydraulic fluid lines for leaks, loose connections, chafe marks and damage. Any
defects found must be rectified without delay. •
Always tighten any screwed connections that have been loosened during maintenance and repair. •