Ingersoll-Rand BXR-60, Инструкция по установке / эксплуатации / техническому обслуживанию / запасным частям

Страница: 21 / 67

7-2
SECTION 7 - TOUBLE SHOOTING - GENERAL MAINTENANCE
GENERAL MAINTENANCE
1. Engine RPM is adjusted to: 3,600 - 3,700 min -1 (3,600 - 3,700 rpm ) (With load ).
2. Check Bolts and Nuts for looseness. Tighten it if necessary.
3. Check for fuel and oil leak.
4. Keep the RUBBER BUFFER away from oil and fuel.
5. Check the V-Belt and Timing Belt for wear, damage and cracks. If necessary, replace the belt with new one.
6. Please refer to “INSTRUCTION FOR USE” for ROBIN engine EY15D regarding the how-to maintenance for engine.
AIR CLEANER
Keep the Air Cleaner Element clean. Take out the outer urethane foam and inner element. Wash the element in
kerosene or diesel fuel. Saturate it in a mixture of 3 parts kerosene or diesel fuel and 1 part engine oil. Shake off
excessive oil and reinstall. Wash the air cleaner case using kerosene. After cleaning it up, apply the engine oil on the
inner part of the case.
If the air cleaner element is seriously contaminated, the start-up failure, poor output and malfunctions of the engine
may result.