Ingersoll-Rand ARO EVO EP20 Series, Руководство оператора

Страница: 14 / 44

Page 14 of 44 EP20-XXXXX-XXX-XXX (en)
White
Red
Black
White
Red
Black
White
Red
Black
Leak Detect Diaphragm 1
Leak Detect Diaphragm 2
Leak Detect Diaphragm 3
Pin 18 on VFD
(Digital input)
Pin 19 on VFD
(Digital input)
Pin 32 on VFD
(Digital input)
Pin 13 on VFD
(24V DC)
Pin 20 on VFD
(Common)
Leak Detection Sensor PN Voltage Device Rating (mA) Temperature Rating
96270-2 (ATEX / IECEx / NEC / CEC) 24 VDC 40 -0 ° F - 176 ° F (-18 ° C - 80 ° C)
NOTE : The same leak detection sensor is used for both ordinary and hazardous applications.

The Leak Detection Sensor comes with 2m of cable length with flying lead connections. It is recommended to combine
leak sensor cables into a single low voltage cable bundle to send to the VFD.

It is also recommended to install the leak detects as shown below to keep track of which leak detect corresponds to each
Diaphragm as the VFD will indicate which leak detect has tripped. Leak detect #1 would correspond with the lowest cylin-
der with the signal wire tied to digital input 18 of the VFD.
Leak detector
#1 location
Leak detector
#2 location
Leak detector
#3 location
Figure 9