Terminal User Guide
Page 26
iWL250 User Guide
Copyright© 2019 Ingenico
Transactions
In order to perform a transaction in a quick and efficient manner you may type in
the transaction amount from the idle screen, insert the card to the card reader or
press
menu
key and select sale option. This method may be used to start any sale
transaction, regardless of card type is (i.e. contactless cards or cards with, or
without, a chip).
Enter the transaction amount while the idle screen is being displayed by typing in
the amount in pence (i.e.
1234
for £12.34) followed by the
green
key. If you make
a mistake when entering the amount, you can correct this by using the correction
keys. Press the
yellow
key once to delete one character at a time. Press the
red
key to cancel the amount entry and return to the idle screen.
Contactless card transactions are performed by this method and when the
transaction value is under the contactless card limit (e.g. £30.00). Your terminal will
only prompt for a card to be presented when a contactless
transaction is allowed. When a contactless transaction is
allowed your terminal will show a contactless icon on the
screen. The terminal will prompt for contactless card or
contactless device to be presented depending on the
amount.
Contactless transactions that are above a pre-set value
(Floor Limit) may go online/dial for authorisation.
If you consistently sell an item at the same price you can ‘recall’ the last transaction
amount by pressing the
dot
key while the idle screen is being displayed. Your
terminal will allow you to confirm if this is the correct amount, and you can continue
with the transaction by pressing the
green
key.
Alternatively, the traditional method of starting the transaction by swiping or
inserting the card first may be utilised if required.
