Terminal User Guide
Page 10
iWL250 User Guide
Copyright© 2019 Ingenico
Base Overview
An overview of your terminal’s base unit is shown below:
The connections available on the base are as follows:
Mobile terminals come with a base unit which has charging
capabilities only; the power socket is the only working
connection in this case.
You should set up your base unit in a convenient location close to a power source
and, for Bluetooth terminals, either a telephone socket and/or an Ethernet socket,
as required.
To open the base unit cover, located on the bottom of the base unit, you must
unclip both access clips (as shown above) and lift the cover from the base unit.
To replace the cover reverse these instructions being sure to engage all the
retaining pins before the access clips.
Terminal Charging Port
Terminal
Guides
Telephone Socket
Ethernet
Socket
Power Socket
Cover Access Clips
Base Unit Cover
