IPA280 – User guide
•
14/43
Copyright © 2010 Ingenico
9000002522 R11 000 02/1002
All rights reserved
4.3.
Installing SPM SAM
CAUTION
:
Before to start, switch off the terminal.
The SPM has two slots for SAM cards. They are placed in the rear of the SPM side,
(see
procedure for opening 4.1)
. (
The location of modules are engraved in compartment)
When introducing a SAM in its slot, be sure to put the cut corner as indicated on marking.
•
Lift the protective caps
1
and introduce the module in its slot to the end until you hear
a click.
To remove SAM, we suggest you to use a piece
of adhesive previously pasted on both sides of
the SAM as shown here below
4.4.
Installing PDA SAM and SIM
The PDA side has two slots for SIM cards and two slots for SAM cards. They are placed
inside the battery compartment, in the rear of the terminal
(see procedure to opening 4.1)
.
•
Lift the battery, as shown in the following illustration.
•
Slots of module are located under the battery; insert the card
module in its slot. Make sure you put the cut corner as
indicated on marking.
•
Put the battery back (see procedure 4.1
).
Terminal slots
Cut corner
1
1
1
1
Adhesive
Corner cut
SAM
SAM Cards
SIM Cards
SAM
SIM
