IPA280 – User guide
•
12/43
Copyright © 2010 Ingenico
9000002522 R11 000 02/1002
All rights reserved
4.
Installation and connection
CAUTION: Before to start, make sure you have removed the protective film battery.
4.1.
Battery
To access the battery follow the instructions below:
•
Open the battery compartment using the slide levers in the direction shown
1
1
1
1
and
follow the procedure illustrated by arrows on illustration.
•
Position the battery pack, making sure the battery contacts are
aligned with the contacts in the compartment, as shown in the
following illustration.
•
Place the battery pack into the battery bay and press the battery
securely into the compartment.
•
Close the device by fitting back the SPM (see section 4.2)
WARNING
! There is a risk of fire and burns if the battery pack is
handled improperly.
DO NOT
disassembles, crush, puncture, short external contacts, or dispose the battery pack
in fire or water.
DO NOT
attempt to open or service the battery pack. Dispose of used batteries according
to local recycling guidelines in your area.
A backup battery cell is embedded into your device to prevent data loss during exchange of
the removable battery pack.
