Ingenico ELITE 790, Руководство пользователя

Страница: 26 / 32

ELITE 790 Terminal
26
2- Cleaning Procedures
The plastic used in the construction of this terminal may be damaged if cleaned with strong
solvents.
The following is a list of recommendations for cleaning the terminal and its base.
3- Changing the paper roll
0
Do not pull the paper, press the key
7
for a
paper feed
.
0
Only use paper provided by your distributor;
similar other papers could damage the printer.
In the case of a thermal printer, use a paper
brand KANZAN reference KF50.
0
Do not wait until the paper roll is completely
finished before changing it. When the red
stripe on the paper appears, remove the paper
roll and replace it. You can use the paper feed
key
7
to move the paper on. This key is only
active when the machine is in an idle state.
0
For the loading of a new paper roll, open the cover, lift the lever to the right of the printer,
Slide paper through the printer until it comes out the other side. Lower the lever. Press the
paper feed key
7
to check the paper has fed through properly.
•
Clean the outside of the terminal with a soft cloth moistened with a mild detergent
solution.
•
Never spray cleaning solution directly onto the terminal as liquid may enter the
unit.
•
The smart card reader does not normally require cleaning, but if it does, the
magnetic card reader cleaning kit can be used.
•
Do not use Isopropyl Alcohol based cleaning products, use water-based.
•
If in doubt about a cleaning product, contact your terminal supplier.
Lever