4
R
e
v
is
ió
n
: 0
5
R
e
f.:
M
A
N
U
_
V
B
Z
1
6
/0
2
/2
0
1
7
•
All Infrico products are factory tested for performance and are free from defects when shipped.
•
When your equipment arrives, you should carefully inspect the unit for damage during delivery.
•
If damage is detected, you should save all the crating material and make note on the carrier's bill of
lading describing the damage. A freight claim should be filled immediately.
•
If damage is subsequently noted during or immediately after installation, contact our customer care
service.
NOTE: Infrico is not responsible for damage incurred during shipment.
This unit is intended for indoor use only.
Be sure the location chosen for your unit must be able to provide good air circulation for most
efficient refrigeration.
Avoid locations near heat sources such as stoves, ovens, fryers, and also direct sunlight where
temperatures can reach extreme values. Besides, do not select a location in an area where
temperatures may drop below 55ºF or increase more than 80ºF and 55% Rh.
Frontal tempered glass hinged in straight
glass series. Tilt forward glass system.
You should allow enough clearance between the unit and the frontal opening glass in order to
make use of the stay open feature of doors at 120º. This front opening glass facilitates an easy access
and cleaning.
4
RECEIVING AND INSPECTING THE EQUIPMENT
5
INSTALLATION
5.1
Location
