INFOSEC P2 SunRise 5000, Руководство пользователя

Страница: 59 / 67

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 07 11 AA 59 203 09
58

05: ECO mode enable/disable
Interface Setting
Parameter 3:
Enable or disable ECO function. The following two
options are available:
DIS:
disable ECO function
ENA:
enable ECO function
If the ECO function is disabled, the voltage range and frequency
range for ECO mode can still be set, but it is meaningless unless
the ECO function is enabled.

06: Voltage range for ECO mode
Interface Setting
Parameter 2:
Low voltage point in ECO mode. The setting range
is from 5% to 10% of the nominal voltage.
Parameter 3:
High voltage point in ECO mode. The setting range
is from 5% to 10% of the nominal voltage.

07: Frequency range for ECO mode
Interface Setting
Parameter 2:
Set low frequency point for ECO mode.
50 Hz system: Setting range is from 46.0Hz to 48.0Hz.
60 Hz system: Setting range is from 56.0Hz to 58.0Hz.
The default value is 48.0Hz/58.0Hz.
Parameter 3:
Set high frequency point for ECO mode.
50 Hz: Setting range is from 52.0Hz to 54.0 Hz.
60 Hz: Setting range is from 62.0Hz to 64.0Hz.
The default value is 52.0Hz/62.0Hz.

08: Bypass mode setting
Interface Setting
Parameter 2:
OPN
: Bypass allowed. When selected, the UPS will run in Bypass
mode depending on bypass enabled/disabled setting.
FBD
: Bypass not allowed. When selected, it is prohibited to
running in Bypass mode under any circumstances.
Parameter 3:
ENA
: Bypass enabled. When selected, Bypass mode is activated.
DIS
: Bypass disabled. When selected, automatic bypass is
acceptable, but manual bypass is not allowed. Manual bypass
means users manually operate the UPS for Bypass mode. For
example, pressing the OFF button in AC mode to switch to
Bypass mode.

09: Battery backup time setting
Interface Setting
Parameter 3:
000~999:
Set the maximum backup time from 0min to 999min.
UPS will shut down to protect battery after backup time runs out.
The default value is 990min.
DIS:
Disable battery discharge protection and backup time will
depend on battery capacity.