INFOSEC E4 LCD 2000, Руководство пользователя

Страница: 33 / 41

INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 09 15 AA 59 203 51
33
or converter mode.
OFF/Enter Button

Turn off the UPS: Press and hold this button for at least 2 seconds to
turn off the UPS. The UPS switches to standby mode, normal power
mode or transfer to Bypass mode if the Bypass enabled mode is set.

Confirm the selection key: Press this button to confirm the selection
in the UPS setting mode.
Select Button

Switch LCD message: Press this button to change the LCD message
for input voltage, input frequency, battery voltage, output voltage and
output frequency. It will return to the default display after 10 seconds.

Setting mode: Press and hold this button for 5 seconds to enter the
UPS setting mode when the UPS is in standby mode or bypass
mode.

Down key: Press this button to display next selection in the UPS
setting mode.
ON/Mute + Select
Button

Switch to bypass mode: When the main power is normal, press
ON/Mute and Select buttons simultaneously for 5 seconds. Then the
UPS will enter bypass mode. This action will be ineffective when the
input voltage is out of the acceptable range.
3-2. LCD Panel
Display Function
Backup time information
Indicates the remaining backup time in pie chart form.
Indicates the remaining backup time in numbers.
H: hours, M: minute, S: second
Fault information
Indicates a warning or fault.
Indicates the warning or fault codes. These codes are detailed in
section 3-5.
Mute operation
Indicates that the UPS alarm is disabled.
Output & Battery voltage information