EonStor S12S-R/G1032 Installation and Hardware Reference Manual
Figure 5-9: PSU Label on the Extraction Handle
To replace a PSU, please follow these steps:
Step 1.
Turn off the PSU.
The power switch is located on each
PSU’s rear-facing panel. (See
Figure 5-10
)
Step 2.
Disconnect the power cord
that connects the faulty
PSU to the main power source.
Figure 5-10: Locations of Power Sockets and Power Switches
Step 3.
Loosen the PSU retention screw
that secures the
extraction handle to the chassis. (See
Figure 5-11
)
Figure 5-11: Loosening the PSU Retention Screw
5-14
Replacing a Faulty PSU
