EonStor S12S-R/G1032 Installation and Hardware Reference Manual
5.2.2
Removing the Controller Module
To remove the controller module:
Step 1.
Prepare a clean, static-free work pad or container
to
place the removed controller.
Step
2.
Disconnect all cables
from the controller module.
These may include the Ethernet cable, SAS host links,
and serial cables connected to the COM ports.
Step 3.
Remove the screws
that secure the ejection levers to
the chassis. (See
Figure 5-1
)
Figure 5-1: Removing the Controller Retention Screws
Step 4.
Remove the controller module
by pressing down the
two (2) levers. The controller module will automatically
ease out of the controller module bay. (See
Figure 5-2
)
5-4
Replacing a Controller Module
