inform PYRAMID DSP PREMIUM Series, Инструкция по установке и эксплуатации, Страница: 3 / 70

III
Description of the Symbols Used in the Manual
Description of the Abbreviations Used in the Guide
UPS: Uninterruptible Power Systems
ESD: Emergency Switching Device
RS232: Serial Communication Protocol
SNMP: Simple Network Management Protocol
V: Volt
A: Ampere
P: Power
For Input, Output and Manual/Maintenance Bypass Circuit Breaker;
“I” (ON): Closing the Circuit
“0” (OFF): Opening the Circuit
For Battery Circuit Breaker;
Active (ON/I): Closing the Fast Fuse Holder
Passive (OFF/0): Opening the Fast Fuse Holder
Manufacturer
İNFORM ELEKTRONİK SAN. VE TİC. A.Ş.
Pelitli Mah. 4440 Sokak No:12 Gebze – Kocaeli – TÜRKİYE
Phone : +90 (262) 751 16 00
Fax
: +90 (262) 751 16 02
This symbol points out the instructions which are especially important.
This symbol points out the risk of electric shock if the following instruction is not obeyed.
This symbol points out the instructions, which may be resulted with the injury of the
operator or damage of the equipment if not obeyed.
All packing material must be recycled in compliance with the laws in force in the country
where the system is installed.