inform ETR EVO Series, Инструкция по установке и эксплуатации

Страница: 40 / 72

ETR EVO UPS User Manual (Ver. 1.0) Page 35
6.1. Colourful Graphical Touchscreen Panel
Energy Flow Diagram/Modes Of Operation and Menus are displayed on LCD.
The description of the symbols in the energy flow diagram:
1.
Bypass Input: If Bypass voltage is within the limits and in synchronization with inverter, then it lits Green,
If Bypass voltage is within the limits and not in synchronization with inverter; it lits Orange.
2.
Rectifier Input: If Input voltage is within the limits, then it lits Green
3. Rectifier: Converts AC voltage at the input into DC voltage. You may reach the rectifier measurements by
touching it
4.
Bypass Line: Shows that the loads are supplied via Bypass and line colour is Orange. If UPS is on EcoMode
it is Green.
5.
Battery: Shows battery condition. If it is discharging the indicator goes down, if it is charging then the
indicator goes up. You may reach the battery/DC measurement by touching it.
6.
Inverter: Converts DC voltage into AC voltage. You may reach the output measurement by touching it.
7. Operation Mode Information: Shows UPS’s current operation mode.
8. Load: Shows the percentage of the load as numerical and graphical information. If there is overload at
the output then the load graphic lits Red. You may reach the output power measurement by touching it.
9.
Menu: You may reach the menus by touching it.
10. Configuration: It indicates if UPS is in parallel or single operation configuration. In Single Mode; there is
no symbol
11.
Time: It indicates the time
12. Circuit Breaker: It appears if battery Fuse is in “OFF” position or battery fuse has blown. If battery Fuse is
in “ON” position; the circuit breaker icon is not displayed, instead battery capacity percentage is displayed.
10
7
0
2
3
6
6
1
0
8
5
4
9
12
11
13
14
15
17
16
18