April 10, 2013
INFODRAW TMRS User Manual v5.3
85
•
For ordinary initial setup of the TMRS unit, usually you will only need to change the
following parameters in the Device Configurator:
Menu:
Parameter:
Connection Menu
a)
Your server’s
IP address
in the
“Remote Server”
box.
Modem Menu
For Automatic Modem Setup:
a)
Click the
“Automatic”
option under “Modem Configuration”.
The Automatic option supports most cellular provider APN’s
around the world. In most cases this will provide an automatic
connection to the cellular network in use.
For Manual Modem Setup
(click the
“Manual”
option)
:
a)
Enter the APN (Access Point Name) of your Cellular Provider.
b)
A User Name and Password for your Cellular Provider may
also be required (mostly for VPN users).
After inputting the necessary settings
using the Device Configurator application,
the configurations must be saved into the
unit. This is done by
opening the “File”
menu and clicking
“Write To Device”
(The candle icon).
After pressing “Write to
Device”, the status at the
bottom left hand side of the
application will show:
“Parameters Saved”
.