INFODRAW TMRS-102 Скачать руководство пользователя страница 102

Страница: 102 / 218

April 10, 2013

INFODRAW TMRS User Manual v5.3

102

3-6 Device Control Parameters:

Parameters:

Descriptions:

Rename

This allows you to change the name of the TMRS device.

Properties

This will bring up the window displaying the device’s ID
number and firmware version.

Attach Audio-Video

This allows you to attach the audio channel to the video
channel for synchronised recording.

Restart Device

This option restarts the TMRS device remotely.

Restart Application

This option restarts the video controller.

Set Packet Data Size

Default is 1000 (recommended

not

to change this

parameter).

Set Time

Select this option to set the time on the TMRS device to the
current time.

The user can change and control the
device from the MRS Monitor:

Right clicking on a TMRS device name,
brings up a menu with the following
options:

The descriptions are listed below:

Содержание TMRS-102



























































































































































































































Результаты поиска

Содержание TMRS-102

Отзывы:

INFODRAW TMRS-102, Руководство пользователя, Страница: 102 / 218

Результаты поиска

Содержание TMRS-102

Отзывы: