April 10, 2013
INFODRAW TMRS User Manual v5.3
132
3-9-7 SMB Recording (External Storage Device):
The TMRS unit is able to record in the device (Device Recording) on two formats:
1)
On a Micro SD card, that is inserted into its slot in the device.
2)
On an
External Network Storage Device
that can be connected to the TMRS Unit’s
LAN interface. An external network storage device, like a portable hard-drive, can
add greater recording space and allow for higher quality device recording than on
the Micro SD card. The External Network Storage Device must have an
Ethernet
input for the TMRS unit to be able to connect to it. Ethernet external network
storage drives can be purchased from your local IT store.
In order to communicate with the external network storage device, a
Local Area Network
needs to be created in the TMRS unit. Follow these instructions to do so:
1)
Open the
“Device Configurator”
Application.
2)
Turn the TMRS unit off.
3)
Ensure the 2 left dip switches on the TMRS unit (numbers 1,2 are in up position).
4)
Ensure the SIM card is
NOT
inserted into the unit.
5)
Connect the TMRS unit to the PC using the USB Cable. Then turn it on.
6)
Once connected to the PC, the unit’s parameters will load automatically on the
“Device Configurator”.
7)
Go to the
“Local Network”
menu of the Device Configurator.
a)
Enable the “
Manual”
option.
b)
Enter the following
parameters of your local
network:
Host Address:
192.168.0.1
Subnet Mask:
255.255.0.0
Broadcast Address:
