July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
181
1)
Make sure that the device is on.
2)
Wait for a few minutes before determining that there is no connection. It can
take around 3 minutes for the device to be recognized by the software.
3)
Make sure that the red and blue LEDs (if the modem is operational) are
blinking. If the blue LED does not work, make sure that the device is
connected properly to the GSM antenna.
4)
Enter the “MRS Device Configurator” program. Open the “Connection” tab.
Enable the “Remote Server” option, configure your IP address so that it
would match your server address. Check that your server is operational.
5)
Open the “MRS Device Configurator” program and choose the “Device
Identification” tab. Make sure that the device ID number is above 0 and
under 2,000,000,000.
6)
Open the “MRS Monitor” program, open the “Session” menu and choose the
“connection” option. If you choose to use your device as a client (not server)
enable the “Remote Server” option. Make sure that the server address, user
name and password (if required) are correct.
7)
Enter the “Permissions” feature of the “MRS monitor” program in your server
and verify that your device is permitted to access the server.
4)
Q: The “MRS Monitor” program does not recognize my device (When connecting
with the wireless cellular modem).
A:
Check the following:
