July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
124
Commands can be sent to the MRS-400 unit (SIM Card Number) remotely by SMS. There are
3 orders that can be sent:
1) Restart modem (PPP)
2) Reset device
3) Change Server IP
In order to make these operations happen, follow these instructions:
a.
Remove any SIM card from the MRS-400 device.
b.
Attach a USB cable to the device and open the “MRS Device Configurator”.
c.
Open the
“SMS”
tab menu.
d.
In the
“Authentication Code”
box, write down a code. You will need to put this code at
the start of each SMS to the MRS-400 device.
As was said above, there are three options to this feature.
These are the ways to activate each of them by SMS to the device:
1.
Restart PPP:
Authentication_Code restart ppp
For the above device example, the SMS would be:
76D restart ppp
2.
Reset Device:
Authentication_Code reset device
For the above device example, the SMS would be:
76D reset device
3.
Change Server IP:
Authentication_Code "server" New_Server_IP
For the above device example, the SMS would be:
76D server 212.68.105.7