www.infocus.com
JTouch-00-RS232-Commands
44
Get Function
Command
Code (HEX)
HEX
C. ID Ty.Cm.#1 #2 #3 CR ASCII ID=01
Get-Date: Month
70(p)
6B 30 31 67 70 4D 30 30 0D k01gpM00<CR>
Get-Date: Day
70(p)
6B 30 31 67 70 44 30 30 0D k01gpD00<CR>
Get-Time: Hour
71(q)
6B 30 31 67 71 48 30 30 0D k01gqH00<CR>
Get-Time: Min
71(q)
6B 30 31 67 71 4D 30 30 0D k01gqM00<CR>
Get-Time: Sec
71(q)
6B 30 31 67 71 53 30 30 0D k01gqS00<CR>
Get-Device name
72(r)
6B 30 31 67 72 30 30 30 0D k01gr000<CR>
Get-MAC address
73(s)
6B 30 31 67 73 30 30 30 0D k01gs000<CR>
Get-RS232 version
74(t)
6B 30 31 67 74 30 30 30 0D k01gt000<CR>
Wake Display from Standby – Power LED displays red
To wake the display from standby mode when using LAN connection is only possible
by sending a MAC address command.
Download tool Netwaker.exe from https://drive.conxme.com/s/iBLJG72QxyFWAf3
Enter the MAC address of the display and press button to the right side.
This will send a signal to the display and wake from standby mode.
