INFINOVO MEDICAL i3, Руководство оператора

Страница: 36 / 44

31
1. In the main application interface, click the [Main menu]
icon in the upper right corner to enter the interface;
2. Click [Data Management], enter the data management
interface;
3.Click [Statistical Analysis] to count the number of blood
glucose, average value, lowest value, highest value, target blood
glucose percentage, low blood sugar percentage, high blood
sugar percentage, and fluctuation coefficient according to time.
4.Click on [Wearing Record] to view the transmitter
number, start and end time.
5.Click [Data Export] to export blood glucose readings to
a local folder.
10.3 Data management
11 Stop the Sensor
Caution
The transmitter can be reused in its lifetime and
do not discarded it.
Information on the end of sensor monitoring:
1.Do not remove the transmitter when the sensor base is
attached to the skin;
2.Consult the local Medical Waste Administration for
treatment.
3.In some cases, sensor monitoring may end prematurely.
The sensor can give a blood glucose reading for 14 days,
but it cannot guarantee the accuracy of the blood glucose
reading after 14 days, because the performance is not tested.
When the sensor monitoring is finished, the corresponding
prompt will not run.
11.1 Stop the sensor
After the sensor test cycle ends, stop the sensor electrode.
Steps as follows:
1. In the main menu, click [Stop Sensor] and a prompt
dialog box will pop up.