21
4.3 Network Settings
Click “Network” in the navigation bar, and the following interface will display:
Figure 4-9 Network Settings
8 options tabs are available: Network, FTP, SMTP, HTTPS,
802.1X, QOS, IGMP
and SIP.
4.3.1 Network Settings
In the Network Settings interface (as shown in the figure above), users can
enable or disable DHCP. When it is disabled, users can set Unit IP address,
Subnet mask, Gateway and DNS server IP address manually.
Users can also enable/disable PPPoE in this interface. If enabled, users can set
the user name and password.
22
V6812IR-H0 series camera supports heartbeat function. In SNMP settings, set
and save the heartbeat sever IP address and Heartbeat interval, and then the
heartbeat package will be sent to the server or client, which greatly facilitates
the server or client to know about the camera’s network status.
4.3.2 FTP Settings
Figure 4-10 FTP Settings
V6812IR-H0 series camera has the function of alarm associated with FTP
upload (alarm triggered image snapshot). Configure server IP, user name and
password in the FTP settings and activate FTP handling way in alarm settings,
then alarm triggered images FTP upload can be achieved.
4.3.3 SMTP Settings
Figure 4-11 SMTP Settings
23
User needs to set mail server, recipient, etc in SMTP settings interface.
Server IP
: Set mail server address.
From:
Set sender’s mail address.
To:
Mail address of recipient.
CC:
Mail address of the person copy to.
Authentication
: Enable or disable authentication function. This function
should be set according to authentication requirements of mail server.
User name
: Sender’s name, it can be set according user’s needs.
Password
: Set sender’s password.
Note:
there is no limit for Sender’s name and password settings.
After setting, click “Set” Save to take effect.
If user selects “mail” in “Alarm Settings” interface, system will send mails
according to SMTP settings.
4.3.4 HTTPS Settings
Figure 4-12 HTTPS Settings
V6812IR-H0 series camera supports HTTPS protocol. You can import the CA
certificate in the interface.
24
4.3.5 802.1X Settings
Figure 4-13 802.1X Settings
V6812IR-H0 series camera supports 802.1X protocol. You have to enable
802.1X authentication when needed. Then, select an EAP method and enter the
user name and password.
4.3.6 QOS Settings
Figure 4-14 QOS Settings
There are 4 network Qos modes to be selected:
(1) Normal Service
(2) Max Reliability
(3) Max Throughput
(4) Min Delay
Recommend: Normal Service.
