4
There are two options in the “RPT Setup” menu.
To toggle between the following two options using the NEXT or
LAST key:
“ON”=
to select the PTZ Control Mode for Infinova matrix
switching systems,
“OFF”
= a factory-reserved option for future products.
To set a desired PTZ Control Mode, press PROG key.
“Previous Menu”=
to return to the previous menu.
2.1.6 Beeper Setup
Press PROG key to get in to “Beeper Setup” menu.
There are two options in the beeper setup menu. To toggle between
the following two options using the NEXT or LAST key:
“
ON”=
to enable the keyboard beeper, or “
OFF”
=to disable the
keyboard beeper.
To set up keyboard beeper, press PROG key.
The LCD screen on V2117 keyboard will show: “Parameter is
changed”.
“Previous Menu”=
to return to the previous menu.
2.1.7 CAM Input Setup
Press PROG key to get in to “Cam Input Setup” menu.
There are two options in the “Cam Input Setup” menu. To toggle
between the following two options using the NEXT or LAST key:
1. “
Mode 1
” indicates normal camera input mode. The number that
the user enters on the keyboard is the complete camera number.
“
Mode 2
” indicates camera number input memory mode. When
user inputs a camera number that has more than 4 digits on the
keyboard, the digits that are higher than 4 will be remembered. And
then, if user input a camera number with 4 digits or less, the
remembered number will be filled in the order that is higher than the
4th digit (from right) to form a new number. Press PROG key to
select mode. The LCD screen on V2117 keyboard will show:
“Parameter is changed”.
2.
“Previous Menu”=
to return to the previous menu.
2.1.8 Factory Default
Press PROG key to set the factory default parameters.
Note:
To avoid the unexpected errors happening, please do not
operate the joystick when setting the factory default parameters.
2.1.9 Exit
For menu exit, turn the key switch to PROGRAM or OPERATE
position.
2.2 Version control
Press F1 key to display the version number:
VXXX
2.3 System Connection
Take V2117 system keyboard as an example to show system
connections in this chapter. Unless noted otherwise, the descriptions
illustrated by V2117 apply to V2117X as well.
V2117 keyboard features built-in RS485 and Manchester control
code generators for direct control over Infinova series
receiver/drivers or dome cameras.
T+
T-
G
S
W
B
ETHERNET
1
2
3
RS232 PORT
4
Figure 2-1. V2117 Rear Panel
Figure 2-1 (shown above) illustrates the communication ports on the
profile of V2117 keyboard:
1.
These three pins respectively labeled "B", "W" and "S" are used
for direct control of receiver/drivers or dome cameras via
Manchester control code;
2.
These three pins, respectively labeled as "G", "T-" and "T+", are
provided for direct control over receiver/drivers dome cameras
via RS485 control code;
3.
Ethernet port is used for Ethernet connections;
4.
RS-232 port is used for RS-232 communications with the matrix
switching system.
2.3.1 V2117 Keyboard Controls Super Domes
A single keyboard is capable of providing direct PTZ control over
Infinova series Super Dome cameras.
Figure 2-2 and Figure 2-3 shown below illustrate the connections
with super domes.
