Operations
Instructions
Camera
Call-up
NOTE:
The dome cameras must be called up
(put under the control of) via the keyboard
before operation or programming.
To call up a camera, enter the camera ID
number, and press the CAM key. For details on
setting camera ID, please refer to Installation
Manual.
Pan & Tilt
Move the joystick in the desired direction.
Zoom
In
Press the TELE key, or turn the joystick
clockwise for a close view of distant objects.
TELE
or
Zoom
Out
Press the WIDE key, or turn the joystick
counterclockwise for a wide scene.
WIDE
or
Iris Open
Press the OPEN key to manually increase the
aperture to make the image brighter.
OPEN
Iris Close
Press the CLOSE key to manually decrease the
aperture to make the image darker.
CLOSE
Focus Near
Press the NEAR key to manually adjust focus on
near objects.
NEAR
Focus Far
Press the FAR key to manually adjust focus on
distant objects.
FAR
For more details on camera control and video switching operations,
please refer to relevant manuals supplied with your matrix switching
system. Operations concerning some particular features of the
domes will be further discussed in the next chapter, Menu
Programming.
3.3 Setting and Calling up a Preset
Presets enable users to pre-define and save camera information such
as pan/tilt angle and zoom to create specific views that can be called
up for display either automatically (upon home position or alarm) or
manually (via keyboard commands). The super domes are capable
of storing up to 128 such camera views.
The following is a brief introduction on how to define and call up a
preset using the V2117 system keyboard. For preset instructions on
your control system, please refer to relevant manuals provided with
your system keyboard.
To set a preset view
1.
Place the key switch at the PROGRAM position;
OPERATE
PROGRAM
MENU
2.
Move the joystick to change the pan/tilt and lens positions;
+
3.
Enter the preset number on the keypad, and press the SHOT key
to store the settings;
2
8
SHOT
(Setting Preset 28 as an example)
Note:
If the PRESET TITLE DISP entry of OSD SETUP menu (see
section 4.6) is set to “ON”, a description title must be assigned to
the preset. Otherwise, if “OFF”, skip to step 9 directly.
4.
When the following information is displayed, move the cursor to
the first entry of the TITLE item;
PRESET NO. : 028
TITLE:
EXIT:
5.
Deflect the joystick downward (or upward) to select a suitable
character (or a space);
6.
Move the cursor to the next entry;
7.
Repeat Steps 5 through 6 until the whole title has been edited;
8.
Exit title editing menu by deflecting the joystick leftward at the
EXIT entry;
9.
Place the key switch at the OPERATE position.
OPERATE
PROGRAM
MENU
To call up a preset
1.
Place the key switch at the OPERATE position;
OPERATE
PROGRAM
MENU
2.
Enter the desired preset number on the keyboard, and press the
SHOT key to call up.
2
8
SHOT
(Setting Preset 28 as an example)
Note: Some preset number is endowed with special function. Also
the number of programmable presets varies under different
protocols, for details, please refer to “Operations under different
protocols” in Chapter V.
3
