PASSWORD:
******
Follow these steps to enter system access password:
1.
Move the cursor to the first * symbol;
2.
Push the joystick upward (or downward) to toggle through
available numbers (0 ~ 9);
3.
After choosing the desired number, move the cursor to the next *
symbol;
4.
Repeat steps 2 through 3 until the entering of the whole password
is finished.
If the wrong password is entered, the system will prompt “ACCESS
DENY” and deny access to the menu.
If the correct password is entered, the main menu will be displayed on
the screen, shown as below:
SET CAMERA ID
CAMERA SETUP
SET AE MODE
OSD SETUP
CONFIG HOME POSITION
ALARM ACTION AND STATE
AUTOPAN SET
PATTERN SET
AREA SET
DEFAULT SET
EXIT
The main menu provides access to eleven sub-menus as well as
some other system functions, which are briefly outlined in the
following section.
1.
SET CAMERA ID
z
Display the dome's current S/N number.
z
Allow users to enter a new S/N number.
z
Display the camera ID number.
z
Set system password
z
Confirm password
z
Enable/disable password protection
z
Display version number
2.
CAMERA SETUP
z
Enable/disable 12X digital zoom.
z
Set zoom speed (high/low).
z
Set default iris value.
z
Set level iris value [For 22X/23X/35X super domes only].
z
Select iris mode (M/A/Manual Priority)
z
Turn on/off backlight compensation.
z
Select white balance mode (M/A)
z
Set white balance R-gain.
z
Set white balance B-gain.
z
Select focus mode (M/A/Manual Priority)
3.
SET AE MODE
z
Set digital slow shutter.
[Except for 18X super domes with FCB-EX45CP camera]
z
Set shutter speed.
z
Select exposure mode.
z
Define B/W mode.
[For 23X/26X/35X/36X super domes]
z
B/W change. [For 23X/26X/35X/36X super domes]
z
Pro-B/W [For 23X/35X super domes]
z
Reverse current image.
[For 23X/26X/35X/36X super domes]
z
Mirror current image
[For 18X/26X/36X super domes and
22X super domes with VK-S274ER/R camera]
z
Freeze current preset’s image
[For 23X/26X/35X/36X super domes and 22X super domes with
VK-S274ER/R camera]
z
WDR [For 23X/35X/36X super domes only]
z
AGC Level [For 22X /23X/35X super domes only]
z
CAM FUNCTION [For 23X/35X/36X super domes only]
4.
OSD SETUP
z
AUTOPAN title display mode
z
Preset title display mode
z
Zoom display mode
z
Cursor moving speed
z
Enable/disable alarm function
z
Line Lock
z
Phase adjust
z
Clear title
z
Privacy mask set
5.
CONFIG HOME POSITION
z
Set a home position action parameter.
z
Determine how long before the domes return to its home position
(return time).
z
Motor Check
6.
ALARM ACTION AND STATE
z
Define alarm action for each alarm input.
z
Define alarm priority.
z
Define relay output for each alarm input.
z
Set the N.O. or N.C. state for each alarm input.
7.
AUTOPAN SET
Set parameters for AUTOPAN, including:
z
Pan direction,
z
Pan speed,
z
Time to stay at pan limits,
z
Title information.
8.
PATTERN SET
z
Select a pattern to set title information.
z
Define title information for selected area.
z
Title information ON/OFF
8
