Infinova V1492N-18N05, Руководство по эксплуатации, Страница: 9 / 40

3
(QYLURQPHQWDO
Environmental Air Pressure: 1.5MPa
Temperature: -40°F ~ 140°F (-40°C ~ 60°C)
Humidity: 0~95%RH (non-condensing)
1.5 Notice
1. Firstly perform network settings after login. Gateway IP address
should be set as the gateway connected to the V1492N-N IP PTZ
cameras.
2. The IP address and MAC address should not conflict with the IP
address and MAC address of other devices, or no image will be
available.
3. No need to restart the system after performing network settings.
4. If you do not remember the IP address of the IP PTZ camera,
then you can use the scanning software on the PC to detect the IP
address, and you can also restore the default settings (such as IP
address) via the “One Button Reset” function on the base PCB of
high-speed IP PTZ camera (the Reset button is S100).
Chapter II Installation
2.1 Dimensions
There are 4 ways for the mounting of high-speed PTZ camera:
desktop mount, wall mount, pole mount and corner mount.
(Unit: mm)
37=&DPHUD'LPHQVLRQV
4
43.
4
147.6
167.3
94.5
30
2.
4
315.0
%UDFNHW'LPHQVLRQV
1RWH
The PTZ camera’s ID and baud rate can be set via either
software or DIP switch. With the two ways, there are totally 254
address IDs settable for PELCO-P/D and INFINOVA protocols.
For specific setup via DIP switch, please refer to Appendix III
before installation. Address ID = Value of DIP 1 (OFF=0
ON=1).
If the 8 positions on DIP switch S1 are all placed to ON position, it
indicates users can set address ID and baud rate via software. Please
refer to Chapter VII for details.