Infinova V1492N-18N05, Руководство по эксплуатации, Страница: 28 / 40

22
(2) Click in the “Pattern” Area to call up pattern. The
pan/tilt will automatically repeat the navigation course
recorded before.
6HWWLQJ$XWRSDQDQG&DOOLQJXS$XWRSDQ
6HWWLQJ$XWRSDQ
(1) Enter the autopan number in (1~4);
(2) Use the direction button to perform a series of pan and tilt and
make the camera aim to the position and then click in
the “Autopan area” to set the current position as the start point;
(3) Use the direction button to perform a series of pan and tilt and
make the camera aim to the position that is desired as the end
point;
(4)
Click in the “Autopan area” to set the current position
as the end point.
&DOOLQJXS$XWRSDQ
(1) Enter the autopan number in ;
(2) Click button in the “Autopan area” to call up autopan.
The domes will automatically repeat the navigation course
between the two points.
1RWH
The direction of autopan can be set via menu.
&DOOLQJXS$XWRVFDQ
Click to call up scanning track of the camera.
&DOOLQJXS)OLS+RUL]RQWDOƒ
Click to call up “Flip Horizontal 180°”.
Chapter VIIII Video Download
V1492N-N series high-speed IP PTZ camera supports storage with
SD card, so that you can download the videos from the SD card and
convert them to AVI format. Run the InfiReplayer software and the
Video Manager interface appears as below:
Figure 9-1 Video Manager
1RWH
Set the device’s IP address and search videos before
downloading.
For how to setup the InfiReplayer software, please refer to
Appendix VI.
6HDUFK9LGHRV
To search videos, first set the date, then, select the video type and
finally click the Search button.
To search videos within a specified period of time, you can set the
date first and then select a period of time (1 minute, 15 minutes, 30
minutes, 1 hour, 2 hours, and 1 day optional).
The searching results will appear below the video playback
interface.
In the distribution diagram, different colors represent different types
of videos (Green for atuo; orange for manual; red for alarm). Blank
areas indicate no videos.