Infinova V1492N-18N05, Руководство по эксплуатации, Страница: 31 / 40

25
Appendix II Questions & Solutions
The following table describes the symptoms causes, and solutions for the problems.
6\PSWRPV 3RVVLEOH&DXVHV 6ROXWLRQV
Wrong power connection Reconnect power cable
Power supply failure Repair or replace power supply
The high-speed IP PTZ camera does
not perform initiation sequence after
powering on
Power PCB fuse damage Replace the fuse
New PTZ camera’s ID has not been activated
Recycle the power
ID settings are incorrectly
Reset the PTZ camera’s ID
Protocol or Baud rate settings are incorrectly
chosen Proper set the Protocol and Baud rate.
The High-speed IP PTZ camera can’t
be controlled after successful initiation.
Wrong setting in the Interface Setting Perform the setting correctly
Don’t correctly install the inserter to view the
images Refer to the inserter Installation to
reinstall it.
Don’t correctly set the security level of the
browser Refer to the browser setting to reset it.
PTZ camera’s IP address conflict with other
user’s IP address Set the unique IP address
No video signal displayed
Don’t correctly initialize the coding module Restart or after power-off
Forget the ID
Forget the ID or gateway and cannot find the
PTZ camera
Press the “On Button Reset” function
on the panel of IP PTZ camera
manually to restore the default settings