Infinite Play Pleats, Руководство по установке

Страница: 10 / 25

10
EN
Pleats
3-Terminals and connectors of the video door entry system
The following terminals and connectors are located on the back of the PLEATS video door entry system.
-8-pole clamp:
Used for additional 24V power supply (in case the POE power supply is not available).
24VDC+: Positive 24V.
24VDC-: Negative 24V.
M: Common mass.
CH: 12-24V AC-DC relay contact (The two terminals marked CH are a normally open contact).
FP: Landing call.
AL: Generic alarm.
P: Panic button.
- Ethernet connector:
Connector used for data traffic and POE power supply.
4-Maintenance
Clean the product using a soft cloth, do not pour water on the device and do not use any type of chemical product.
Figure 2
Ethernet connector
8-pole clamp