a
b
c
d
Figure 18
Configuring the TCPWM component
5.
Configure the interrupt Component
In this step, you configure the SysInt Component to map the TCPWM interrupt to the CM4 CPU. Open the
Component customizer and follow the steps illustrated in
a.
Change the Name to Isr_Timer
b.
Click OK to complete the configuration of the SysInt Component
A
B
Figure 19
SysInt_PDL Settings
As the final step, connect the interrupt output of the TCPWM Component to the Isr_TCPWM Component
input. This routes the TCPWM interrupt to the CM4 CPU (the selection of the CM4 CPU for this interrupt
will be set in the system interrupt configuration in a later step). In the schematic, use the wire tool
button or press the ‘W’ key to start wiring the Components
Getting started with PSoC
™
6 MCU on PSoC
™
Creator
4 My first PSoC
™
6 MCU design using PSoC
™
Creator
Application Note
23
002-21774 Rev. *G
2022-07-21
