CY8CKIT-147 PSoC® 4100PS Prototyping Kit Guide, Doc. #: 002-18734 Rev. *D
5
Safety Information
Regulatory Compliance
The CY8CKIT-147 PSoC 4100PS Prototyping Kit is intended for use as a development platform for
hardware or software in a laboratory environment. The board is an open system design, which does
not include a shielded enclosure. This may cause interference to other electrical or electronic
devices in close proximity. In a domestic environment, this product may cause radio interference. In
such cases, you may be required to take adequate preventive measures. In addition, this board
should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
settings may affect its performance and cause interference with other apparatus in the immediate
vicinity. If such interference is detected, suitable mitigating measures should be taken.
The PSoC 4100PS Prototyping Kit, as shipped from
the factory, has been verified to meet with
requirements of CE as a Class A product.
The PSoC 4100PS Prototyping Kit contains electrostatic
discharge (ESD) sensitive devices. Electrostatic charges
readily accumulate on the human body and any equipment,
and can discharge without detection. Permanent damage
may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid
performance degradation or loss of functionality. Store
unused PSoC 4100PS Prototyping Kit boards in the
protective shipping package.
End-of-Life/Product Recycling
This kit has an end-of life five years from the date of
manufacture mentioned on the back of the box. Contact your
nearest recycler for discarding the kit.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
