CY8CKIT-147 PSoC® 4100PS Prototyping Kit Guide, Doc. #: 002-18734 Rev. *D
25
4.
Code Examples
This chapter explains the code examples provided along with the PSoC 4100PS Prototyping kit. To
access these code examples, download and install the CY8CKIT-147 PSoC 4100PS Prototyping kit
setup file from the kit web page:
www.cypress.com/CY8CKIT-147
. After installation, the code
example can be accessed from the PSoC Creator
Start
Page as shown in
Figure 4-1
.
4.1
Using the Kit Code Examples
Follow these steps to open and use the example projects.
1. Launch PSoC Creator from the Windows Start menu (
Start
>
All Programs
>
Cypress
>
PSoC Creator <version>
>
PSoC Creator <version>
).
2. On the
Start
page, click on
CY8CKIT-147
under
Start
>
Kits
. A list of code examples appears, as
shown in
Figure 4-1
.
3. Click on the desired code example and save it at a desired location. For the remaining steps,
CE218651_Breathing_LED_SmartIO.cywrk
is used as a reference.
Figure 4-1. Open Code Example from PSoC Creator
4. Build the code example by choosing
Build
>
Build <Project Name>
, as shown in
Figure 4-2
. A
.hex
file is generated after a successful build process.
Figure 4-2. Build Code Example from PSoC Creator
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
