DFRobot
Nano I / O Shield For Arduino Nano
DFR0012
Introduction
The Arduino Nano I/O Shield acts as a breadkout board for the Arduino Nano and DFRduino Nano microcontrollers. There are
several different options for power input and the footprint of the DFRduino board is the same as the Arduino Duemilanove. In
addition, each pinout includes 5V and GND pins for easy connection to sensors or servos. Unit comes fully assembled. The board
also has a space specifically for the DFRobot bluetooth module.
NOTE:This shield only support Nano 2.0/2.3. There is small issue with latest v3.0 Nano on IO Shield.
Specification
•
Power supply: +5 V
•
Size: 69x54mm
Documents
•
Introduction
Arduino Nano IO Shield (SKU: DFR0012)
The
Nano IO Shield
extends the Digital I/O with Power and GND Pins. A communication module socket
provides an easy way to integrate
APC220 Radio Data Module(SKU:TEL0005)
Bluetooth module (SKU:TEL0026)
which brings a wireless solution. A separate set of I2C pins make the I2C
device connection.
Содержание DFR0012
Страница 4: ......
