CY8CKIT-147 PSoC® 4100PS Prototyping Kit Guide, Doc. #: 002-18734 Rev. *D
16
Software Installation
3. Click
Install CY8CKIT-147 Kit
to start the kit installation, as shown in
Figure 2-1
.
Figure 2-1. Kit Installer Screen
4. Select the directory in which you want to install the PSoC 4100PS Prototyping kit-related files.
Choose the directory and click
Next
.
5. When you click
Next
, the PSoC 4100PS Prototyping kit installer automatically installs the
required software, if it is not present on your computer. The following is the required software:
a. PSoC Creator 4.2 or later: This software is also available separate from the kit at
www.cypress.com/psoccreator
.
b. PSoC Programmer 3.27.1 or later: This is installed as part of PSoC Creator installation
(
www.cypress.com/programmer
).
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from