Inficon Protec P3000, Перевод оригинального руководства по эксплуатации, Страница: 8 / 128

8
General Safety Precautions
Failure to observe the following precautions could result in damage to the
equipment:
Before exchanging the fuses the Protec P3000 must be disconnected from
power.
The Protec P3000 must not be operated while standing in water or when
exposed to drip water. The same applies to all other kinds of liquids.
This Protec P3000 should only be used in rooms.
Avoid contact of the Protec P3000 with bases, acids and solvents as well as
exposure to extreme climatic conditions.
Ensure sufficient air cooling (see also Section 1.1.2 )
Before installation remove the transportation lock.
In order to ensure adequate ventilation of the Protec P3000, a space of at
least 20 cm 8) (8 in.) must be kept unobstructed to the sides. The clearance
at the rear must be no less than 10 cm (4 in.). Moreover, the Protec P3000
handles for carrying the leak detector at the sides of the main unit must not
be covered at any time as these acts as air inlet and outlet. Avoid the
presence of heat sources in the vicinity of the Protec P3000.