iNetVu PowerSmart 2480, Руководство по эксплуатации

Страница: 4 / 69

4
2. Specifications
POWER SUPPLY P2480A P2480B P2480C
OUTPUT
Voltage 48 VDC 24 VDC (optional) 110/220 VAC
Rated Power 480W *See AC Current
INPUT
Voltage Range 85 ~ 264 VAC
Frequency Range 47 ~ 63Hz
AC Current 6.5A/115VAC 3.5A/230VAC
ENVIRONMENTAL
Working Temp -20° ~ +60° C
Storage Temp.,
Humidity
-40° ~ +85° C, 10 ~ 95% RH
PHYSICAL
Dimensions 482.602 x 361.703 x 43.5 (W x L x H) mm
Max Weight 14 lbs
AMPLIFIER
INTERFACE
RS-232 BUC/AMP Dependent – P2480 Adaptable/Configurable
RS-485 BUC/AMP Dependent – P2480 Adaptable/Configurable
SNMP BUC/AMP Dependent – P2480 Adaptable/Configurable
PC INTERFACE
DB9 on front panel used to access amplifier Software via PC
FRONT PANEL
SWITCHES
POWER Powers ON/OFF the BUC
TRANSMIT Enables/Disables the Transmit
FRONT PANEL
LED INDICATIONS
(M&C FUNCTION
DEPENDENT)
TRANSMIT LED LED will turn ON or OFF indicating transmit status
Lock Loss LED
This LED is lit when the up converter losses lock indicating the 10 MHz
reference on the IFL is not present, the signal level is too low or is frequency
unstable.
Over Temp LED
Unit temperature has exceeded its internal cutoff. Power to the internal
amplifier module is cut off automatically if the internal temperature reaches
a point where the amplifier might be damaged .
Sum Fault LED This LED is lit when there is a critical fault with the internal amplifier
COMPATIBILITY
*Supports most AC/DC Power Amplifiers
BIAS-T Thruplexer
(Optional)
C-COM Standard L-Band and 10 MHz pass (not generated)
C-COM MUX-T
Provides 10 MHz Reference Generation Capability
L-Band pass, plus 10 MHz Clock, plus DC/DC Block
CERTIFICATIONS
FCC
CE
QPS
Note* the iNetVu PowerSmart 2480 could be easily customized to integrate with many AC/DC powered BUC Models. Not
all front panel LED’s are functional with some BUC’s. Specifications subject to change without notice