iNetVu PowerSmart 2480, Руководство по эксплуатации

Страница: 11 / 69

11
Option 1: PowerSmart 2480 with Integrated BUC Connectivity (DC Powered
through M&C)
!
100 - 260VAC
Modulator/Demodulator
RX IN
RX TX
TX OUT
RX OUT
SAT IN
(if app.)
See
Note *
Note *: Network and Serial Port of Controller could be used to communicate with
integrated modems/beacon receiver and/or viewing controller interface via web browser or
software application. See corresponding VSAT based user manual for details on network
connectivity
Optional PC
Software Front
Panel DB9 Interface
Connection – See
Appendix for details
depending on
Integrated BUC
USB Cable
(Optional for
Controller M&C)
BUC M&C AND
POWER CABLE
WARNING:
ENSURE TX POWER IS TURNED OFF IN THE MODEM PRIOR TO CONNECTING
THE TX CABLE IF POSSIBLE. DC BLOCK SHOULD BE USED ON THE TX COAX.
RECOMMENDED IN-SERIES DC BLOCK:
*Aeroflex/Inmet Model 8174
This is an in-series F, 75ohm, inner-conductor model rated to 200VDC and to
10MHz-2GHz passing.
NO DC POWER
PASS IN TX
COAX – DC
BLOCKED
GPS
/Glonass
ANTENNA
DC
BLOCK*
!
MOTOR
AND
SENSOR
CABLES
Disclaimer: The front panel LED’s may
not work for some BUC’s.
100 - 260VAC