iNetVu PowerSmart 2480, Руководство по эксплуатации

Страница: 16 / 69

16
Option 6: PowerSmart 2480 with BIAS-T Thruplexer (DC Powered through coax
+ M&C)
Computer
!
100 - 260VAC
Modulator/Demodulator
RX IN
RX
TX
RX OUT
SAT IN
(if app.)
See Note *
Note *: Network and Serial Port of Controller could be used to communicate with integrated
modems/beacon receivers and/or viewing controller interface via web browser or software
application. See corresponding VSAT based cabling and configuration manual for details on
network connectivity
USB Cable
(Optional for
Controller M&C
Software)
GPS/GLONASS
ANTENNA
WARNING:
ENSURE TX POWER IS TURNED OFF IN THE MODEM PRIOR TO CONNECTING THE
TX CABLE IF POSSIBLE. DC BLOCK SHOULD BE USED ON THE TX COAX FROM THE MODEM IF
THE BUC IS POWERED FROM THE EXTERNAL POWER SUPPLY AND BIAS TEE DOES NOT
PROVIDE DC BLOCK ON MODEM CONNECTION.
SAT
OUT)
!
100 - 260VAC
TX IN TX OUT
MOTOR
AND
SENSOR
CABLES
BUC M&C Cable
Disclaimer: The front panel LED’s may
not work for some BUC’s.