7
Troubleshooting
7.1
Finding the serial port
The serial port used by an Inertia node has to be specified in Inertia Studio, as described in
Section 4.2. In this section, we give an example of how to find the active serial port in Windows
7, 8 and 8.1.
Go to the
Control Panel
and open
Devices and Printers
. A list of all connected devices appears,
as shown in Figure 46.
Figure 46: Devices and Printers with a ProMove-mini Node
The serial port identifier is shown in the device name (COM70 in Figure 46).
If for some reason the identifier is not present in the device name, right click on the device,
select
Properties
, and then select the
Hardware
tab. The port identifier is mentioned in the
Name
column of the
Device Functions
list.
Page 57 of 60
