21
IVEX Series Explosion Proof Camera Manual
No
Checking list
Check
1
Also, remove the protective cap on the input part of the NPT cable after fixing the device.
□
2
Connect carefully according to the input specifications of a separate power supply or power supply (SMPS) supplied by the
manufacturer. (DC12V / AC220V / AC110V, etc.)
□
3
Pay attention to the polarity (+, -) of the data line (RS-485) and connect it correctly to the connection terminal.
□
4
Check the normal video output by connecting the video cable (BNC terminal) to the recorder or monitor correctly.
□
5
Connect the CAT.5 cable (RJ-45 Jack) to the connector correctly, and check that the video and control operate normally under the
optimal network environment.
□
6
Check the Wiper (left/right) operation. (Alarm ON / Alarm OFF)
□
7
Finally check whether the zoom / video / control status is OK.
□
Troubleshooting
1. When receiving the product, be sure to install the product on-site when there is no problem after checking the pre-checklist according to the following
procedure before installation on-site.
2. Please note that for problems that occur during on-site delivery without prior checklist inspection, service measures may be charged in some cases.
