17
IVEX Series Explosion Proof Camera Manual
RTP/RTSP setting
•
Service : Set whether to use RTP/RTSP.
•
RTSP Port : Set the RTSP Port. The default value is 554.
•
Packet Size : This is the menu to set the packet size to be
transmitted to RTP/RTSP.
If the value is low, compatibility with many S/Ws is maintained.
It divides and transmits a small amount of packets.
•
The higher the value, the fewer the number of packets transmitted
by dividing.
However, if the program does not support the high value,
the video will not be displayed.
•
Keep-Alive : It sends the current camera status through continuous
UDP communication. Some S/W and equipment are
not supported.
•
RTP Auth Algorithm : Set the RTP encryption authentication method.
MD5 is highly compatible with many S/Ws.
If it is set to SHA256, stronger encryption is applied,
but it cannot be played on S/W or devices that do not support
SHA256 such as VLC.
•
Go to Basic Setting -> RTP / RTSP.
•
RTSP URL is supported for two types, Unicast and Multicast.
•
The RTSP address of Unicast is as follows. (General use)
- Primary Stream (Channel 1) : rtsp://camera IP/cam0_0
- Secondary Stream (Channel 2) : rtsp://camera IP/cam0_1
- Tertiary Stream (Channel 3) : rtsp://camera IP/cam0_2
•
The RTSP address of Multicast is as follows.
•
To use Multicast, Multicast must be set.
- Primary Stream (Channel 1) : rtsp://camera IP/mcam0_0
- Secondary Stream (Channel 2) : rtsp://camera IP/mcam0_1
- Tertiary Stream (Channel 3) : rtsp://camera IP/mcam0_2
Service
RTSP Port
(Default: 554, 554 ~ 65534)
Packet size
(Default: 1, 1 ~ 12)
Keep-Alive
RTP Auth Algorithm
Camera 1
Multicast
Address
Not used: 0.0.0.0
(225.0.0.0 ~ 239.255.255.255)
Multicast Port
(
Not used: 0, 2048 ~65534)
Camera 2
Multicast
Address
Not used: 0.0.0.0
(225.0.0.0 ~ 239.255.255.255)
Multicast Port
(
Not used: 0, 2048 ~65534)
Camera 3
Multicast
Address
Not used: 0.0.0.0
(225.0.0.0 ~ 239.255.255.255)
Multicast Port
(
Not used: 0, 2048 ~65534)
0.0.0.0
0
0.0.0.0
0
0.0.0.0
0
1
554
Used
Not Used
ON
OFF
MD5
SHA256
Apply
Return
•
RTSP (Real-time Streaming Protocol) is a protocol used to
transmit video and audio streams over a network.
Apple QuickTime and VLC programs are also supported,
but may not be available in a network environment where
a firewall is used. There are two ways to utilize
RTSP: unicast and multicast.
RTP / RTSP setting details
RTSP URL
NETWORK setting
