11
Fastening of the sun shield
•
When the sun shield provided as an accessory is shipped from
the factory, fix the wrench bolt (M6 SET) fastened to the top of the
housing using the L wrench (M5) to the housing.
•
Before bolting, apply enough locking compound (Loctite 263)
to the bolting hole.
•
The thread compound should solidify for an hour,
during which time the installation should be completed.
•
When tightening the bolts, tighten the torque to 15Nm.
IVEX Series Explosion Proof Camera Manual
Before proceeding with the installation of the product, carefully read the
chapter'Safety Rules' in the product manual.
Precautions before installation
