22
There are several values unique to each RGX, as noted below, which will be required for various setup
scenarios.
Side (right)
Case base
Serial number (S/N)
Required for unit activation.
Activation code
Required for unit activation.
MAC addresses (on label)
Required for Ethernet configuration and permanent
installations.
IP Address
Note:
If the value is unknown to you, see your network
administrator who may need the unit's MAC address.
For some tasks, a default static IP is supplied.
User name
The default value is
RGXadmin
(case sensitive).
Figure 3.1 Required setup values
Activation
RGX Gateway
Activation of the RGX is required to enable wireless data exchange between the unit and iNet®, which is
fundamental to the live-monitoring features of iNet Now.
To activate the unit, you will need the following.
x
Access to iNet.
x
RGX Serial Number (S/N), which is located on the right side of the unit.
x
RGX Activation Code (A/C), which is located on the right side of the unit.
Log into iNet and follow this navigation.
x
Click on the
Equipment
tab.
x
Choose
Activate New Equipment
.
x
In the provided fields, enter the unit's
Serial Number
and
Activation Code
.
x
Use the OK button to enter the information.
Gas-detection instruments
For gas-detection instrument data to make the wireless journey from instrument to RGX to iNet and onto
the users of iNet Now, the instruments must be activated for live monitoring. The following are required.
x
Access to iNet.
x
The Serial Number (S/N) for each instrument to be monitored.
Document Number: 0000037533
DO NOT CHANGE WITHOUT THE FOLLOWING AGENCY APPROVALS(S):N/A
Modified: 2018-05-25 13:18:14 EDT
State:In Work
INDUSTRIAL SCIENTIFIC CORPORATION
Title: PRODUCT MANUAL RGX GATEWAY-EN-1
Eng:
Drawing No: 17158071-1
Drawn By: Gaygan, Nancy
Created: 2018-05-16 10:24:51 EDT
Rev: 1
Printed By: Kuzmich, Bob
Int: 1.5
Date:May 29, 2018
