Industrial Scientific MX4 iQuad, Руководство пользователя

Страница: 15 / 44

Operation Guide
Rev 2.0 (p/n: 17140724) INDUSTRIAL SCIENTIFIC 15
While in the normal operating mode, the MX4 display will vary depending
on current monitoring conditions. Variations of the display indicating the
charging, battery, calibration, sensor, communication and alarm status are
shown below.
Charging Screen (From ON Status)
When the MX4 is turned on and the Normal
Monitoring screen is displayed, docking the
instrument to charge it will cause the
instrument to turn off, and move to the
normal charging state. The battery icon will
cycle from empty to full to empty to indicate
that charging is taking place. The names of
any installed sensors are also shown. (The
battery indicator will show full when the
instrument battery is fully charged.) If the
unit is using an alkaline battery, the battery
icon will reflect the amount of battery life
left.
Charging Screen (From OFF Status)
When the MX4 is turned off, and then
docked, the battery life icon will be
displayed and will cycle from empty to full to
empty if the unit is being recharged. The
names of any installed sensors are also
shown. If the unit is using an alkaline
battery, the battery icon will reflect the
amount of battery life left.
IrDA Communications Screen
During IrDA communications, the IrDA
communications icon is displayed. This
happens only when the instrument is
docked.