INDUCS INSTINCT Griddle 10, Инструкция по установке и эксплуатации

Страница: 24 / 40

24
INSTINCT Griddle User Manual rev 01 04/18
Operation Section 3
Control
TURN UNIT ON
Click knob and turn to select temperature.
LED RING
• The LED ring flashes if operator input is need-
ed.
• The LED ring lights up continuously during
cooking.
SELECTING TEMPERATURE
1. Turn knob until the desired temperature is
shown on the display.
2. Leave the knob for approximate 5 seconds,
the display will show alternately the actual
detected temperature and set temperature.
SETTING THE TIMER
1. After setting temperature, double click the
knob to switch to Timer Mode.
2. Turn knob to set the timer from minimum 1
minute to maximum 240 minutes. The LED
ring will flash.
3. Click knob 1 time (1x) to confirm and start
the count-down.
4. Note the display will show alternately the
temperature and the count-down.
5. After the set time is elapsed, the appliance
will sound a beeping signal and the unit will
automatically shut down if the operator takes
no action.
TURNING OFF
Turn knob to go to the lowest temperature.
When LED ring is flashing, turn knob slightly fur-
ther to turn off the appliance.
When the unit is switched off, a
o
appears on
the display.
Additional Settings
Additional settings are available to reduce power
level, and to set display to
O
C or
O
F.
To activate the additional settings:
1. Press down knob while connecting unit to
power outlet.
2. Then turn knob to select setting P1 or P2:
• P1 = Reduce nominal max power from
100% to 25%
• P2 = Change temperature between
O
C
and
O
F
• P3 = Shows the actual Firmware number.
• P4 = Enable / Disable buzzer (timer func-
tion)
3. Click knob 1 time (1x) to confirm selection.
4. In P1, turn knob to select power.
In P2, turn knob to select
O
C or
O
F.
In P4, turn knob to select “on” or “oFF”
5. Click knob 1 time (1x) to confirm selection.
6. To leave the special setting function, keep
pressing down the knob for approximately 5
seconds.