Communication with a PC
36
©
COMSOFT
6.2 COM Interface Configuration
Figure 28:
Characteristics of the serial interface
The interface set under 6.1 must now be configured. To make
transmission as fast as possible it is recommended to adjust the
max. serial baud rate of
NetTEST II
to 115200 Baud. The
setting of data bits, parity as well as stop bits is made
analogous to the settings of
NetTEST II
(see chapter 5.2.3.1).
As
NetTEST II
does not support a hard- or software
handshake, please select under the point
Flow control
–
‘None’.
No further settings have to be made at the terminal program.
Now it can be stored with File –
Save As
as a standard file for
the communication with
NetTEST II
.
Содержание NetTEST II
Страница 1: ......
