INDRA 190105A101, Руководство по установке

Страница: 48 / 50

Troubleshooting
Primary LED lit, white
Solid white LED demonstrates:
• The charger is all set up ready to go
Flashing white LED demonstrates:
• The unit has successfully connected to the Internet and is
almost ready to start charging.
• The LED may flash for several minutes while final setup is happening.
If the unit has been switched on for a long time without being
connected to the Internet this could take more than 10 minutes.
All LEDs are off
• The charger is not receiving power; it may be
disconnected from the mains.
LEDs relating to the primary LED light:
Primary LED lit, blue
• The charger is in Boost mode activated in your App or by
pressing the Boost button on the charger)
Primary LED lit, yellow
• The charger is in Solar mode, (activated in your App on the
Schedule page), and the charger will charge with energy from
your solar panels when you have excess electricity.
Primary LED flashing, blue
• The charger is processing a software update.
3
Primary LED flashing, purple
3 or more flashes, repeating
There is likely a problem with your router. Check that other
devices in the home are connected to the internet, and try
restarting the router. This does not able while using
4G dongle connection.
2
Primary LED flashing, purple
2 flashes, repeating
There is a problem with the connection to your router. Check all cables
are plugged in and that other devices in the home are connected to the
internet, or try restarting the router. This does not able while using
4G dongle connection.
48