Instr 9928789
Rev 01 2018-07
Page 18 of 19
3. Insert speaker
w
(from
6.5 inch Speaker and
Amplifier Kit PN 2883922
) into lid opening with
speaker connector in basket opening as shown
with arrow. Secure speaker with four screws
e
(from
Saddlebag Lid Kit PN 2883670)
. Torque
screws to specification.
TORQUE
20 in. lbs. (2.25 Nm)
4. Clean any excess RTV from speaker.
5. Plug the follow terminals in:
•
RH Saddlebag (Shown in image)
–
(3B)
RH Saddlebag Lid Lock Connector into
lid lock assembly.
–
(3E)
RH Saddlebag Speaker Connector into
speaker.
•
LH Saddlebag (Not shown in image)
–
(2A)
LH Saddlebag Lid Lock Connector into lid
lock assembly.
–
(2D)
LH Saddlebag Speaker Connector into
speaker.
6. Insert four rubber washers
r
(from
Speaker
Grill Kit PN 2883669
) into openings in lid. Ensure
washers are fully inserted into openings. Set and
hold speaker grill
w
(from
Speaker Grill Kit PN
2883669
) in place with one hand and open
saddlebag lid continuing to hold grill in place
for next step.
7. While applying light pressure to hold grill
w
in
place, install speaker cover
r
(from
Kit PN
2883670-XXX
) and four screws
e
(from
Speaker
Grill Kit PN 2883669
). Ensure wiring harness is
routed through opening in cover as shown.
Torque screws to specification.
TORQUE
20 in. lbs. (2.25 Nm)
8. Repeat this section for opposite side saddlebag
lid.
